HPE FlexFabric 5700 32XGT 8XG 2QSFP+ Switch JG898A

HPE FlexFabric 5700 Switch Series

Models
HPE FlexFabric 5700 40XG 2QSFP+ Switch JG896A
HPE FlexFabric 5700 48G 4XG 2QSFP+ Switch JG894A
HPE FlexFabric 5700 32XGT 8XG 2QSFP+ Switch JG898A

Key features

Cut-through with low latency and wire speed
HPE Intelligent Resilient Fabric (IRF) for virtualization and two-tier architectures
High 1 GbE/10GbE ToR port density with 40 GbE uplinks
Layer 2 and Light Layer 3 features with Static Routing and RIP
Convergence-ready with DCB, FCoE, and TRILL

Product overview
The HPE Flex Fabric 5700 Switch Series is a family of high-performance, high-density, ultra-low-latency, top-of-rack (ToR) switches that is part of the Hewlett Packard Enterprise (HPE) FlexNetwork architecture's HPE FlexFabric solution.
Ideally suited for deployment at the server access layer of large enterprise data centers, the HPE 5700 Switch Series is positioned to provide a cost-effective solution that is still powerful enough to handle the increase in virtualized applications and server-toserver
traffic, customers now require ToR switch innovations that will meet their needs for higher-performance server connectivity, convergence of Ethernet and storage traffic, the capability to handle virtual environments, and ultra-low-latency all in a single
device.

Features and benefits

Quality of Service (QoS)

o Flexible classification
Flow classification based on source MAC, destination MAC, Source IP (IPv4/IPv6), destination IP, port, protocol
and VLAN.

o Feature queue scheduling
provides support for Strict Priority (SP), Weighted Deficit Round Robin (WDRR), Weighted Fair Queuing (WFQ),
SP+WDRR, SP+WFQ. Supports Explicit Congestion Notification (ECN), and Weighted Random Early Detection
(WRED)

Flexible high port density

The HPE 5700 Switch Series enables scaling of the server edge with 1 GbE and 10GbE ToR deployments to new heights with high-density 32 and 48-port solutions delivered in a 1RU design; the high server port density is backed by 40 GbE QSFP+ uplinks to deliver the availability of needed bandwidth for demanding applications; each 40 GbE QSFP+ port can also be configured as four 10GbE ports by using a 40-GbE-to-10GbE splitter cable

High-performance switching

cut-through and nonblocking architecture delivers low latency (~1.5 microsecond for 10GbE) for very demanding enterprise applications; the switch delivers high-performance switching capacity and wire-speed packet forwarding

Higher scalability

Hewlett Packard Enterprise (HPE) Intelligent Resilient Framework (IRF) technology simplifies the architecture of server access networks; up to nine HPE 5700 switches can be combined to deliver unmatched scalability of virtualized access
layer switches and flatter two-tier networks using IRF, which reduces cost and complexity. In addition, support for IRF as a fabric will enable the 5700 Series to scale up to 30 switches as one virtualized device.

Advanced modular operating system

Comware v7 software's modular design and multiple processes bring native high stability, independent process monitoring, and restart; the OS also allows individual software modules to be upgraded for higher availability and supports enhanced serviceability functions like hitless software upgrades with single-chassis ISSU

TRILL and EVB/VEPA

Transparent Interconnection of Lots of Links (TRILL) is supported to increase the scale of enterprise data centers; Edge Virtual Bridging with Virtual Ethernet Port Aggregator (EVB/VEPA) provides connectivity into the virtual environment for a data center-ready environment

Reversible airflow

enhanced for data center hot-cold aisle deployment with reversible airflow—for either front-to-back or back-to-front airflow

Redundant fans and power supplies

1+1 internal redundant and hot-pluggable power supplies and dual fan trays enhance reliability and availability

Lower OPEX and greener data center

provide reversible airflow and advanced chassis power management

Data Center Bridging (DCB) protocols

provides support for IEEE 802.1Qbb Priority Flow Control (PFC) and Data Center Bridging Exchange (DCBX) for converged applications

FCoE support

provides support for Fibre Channel over Ethernet (FCoE) including FCF, Transit and NPV.

Jumbo frames

with frame sizes of up to 10,000 bytes on Gigabit Ethernet and 10-Gigabit ports, allows high-performance remote backup and disaster-recovery services to be enabled

Manageability

Full-featured console

provides complete control of the switch with a familiar CLI

Multiple configuration files

allow multiple configuration files to be stored to a flash image

sFlow (RFC 3176)

provides wire-speed traffic accounting and monitoring

SNMP v1, v2c and v3

facilitate centralized discovery, monitoring, and secure management of networking devices

QuickSpecs HPE FlexFabric 5700 Series Accessories

HPE X120 1G SFP LC LH40 1550nm Transceiver JD062A

HPE X120 1G SFP LC BX 10-U Transceiver JD098B

HPE X120 1G SFP LC BX 10-D Transceiver JD099B

HPE X120 1G SFP LC LX Transceiver JD119B

HPE X120 1G SFP RJ45 T Transceiver JD089B

HPE X120 1G SFP LC SX Transceiver JD118B

HPE X125 1G SFP LC LH40 1310nm Transceiver JD061A

HPE X125 1G SFP LC LH70 Transceiver JD063B

HPE X130 10G SFP+ LC SR Transceiver JD092B

HPE X130 10G SFP+ LC LR Transceiver JD094B

HPE FlexNetwork X240 10G SFP+ to SFP+ 0.65m Direct Attach Copper Cable JD095C

HPE FlexNetwork X240 10G SFP+ to SFP+ 1.2m Direct Attach Copper Cable JD096C

HPE FlexNetwork X240 10G SFP+ to SFP+ 3m Direct Attach Copper Cable JD097C

HPE FlexNetwork X240 10G SFP+ to SFP+ 5m Direct Attach Copper Cable JG081C

HPE FlexNetwork X240 40G QSFP+ QSFP+ 1m Direct Attach Copper Cable JG326A

HPE FlexNetwork X240 40G QSFP+ QSFP+ 3m Direct Attach Copper Cable JG327A

HPE FlexNetwork X240 40G QSFP+ QSFP+ 5m Direct Attach Copper Cable JG328A

HPE FlexNetwork X240 40G QSFP+ to 4x10G SFP+ 1mSplitter Cable JG329A

HPE FlexNetwork X240 40G QSFP+ to 4x10G SFP+ 3m Splitter Cable JG330A

HPE FlexNetwork X240 40G QSFP+ to 4x10G SFP+ 5m Splitter Cable JG331A

HPE FlexNetwork X240 10G SFP+ SFP+ 7m Cable JC784C

HPE X140 40G QSFP+ LC LR4 SM 10km 1310nm Transceiver JG661A

HPE X140 40G QSFP+ MPO SR4 Transceiver JG325B

HPE X140 40G QSFP+ MPO MM 850nm CSR4 300m Transceiver JG709A

HPE X140 40G QSFP+ LC BiDi 100m MM Transceiver JL251A

HPE FlexFabric 5700 40XG 2QSFP+ Switch (JG896A)

HPE A58x0AF Back (Power Side) to Front (Port Side) Airflow 300W AC PS JG900A

HPE A58x0AF Back (Power Side) to Front (Port Side) 300W DC PS JG901A

HPE X711 Front (Port Side) to Back (Power Side) High Volume Fan Tray JG552A

HPE X712 Back (Power Side) to Front (Port Side) High Volume Fan Tray JG553A

HPE 58x0AF Back (Power Side) to Front (Port Side) Airflow Fan Tray JC682A

HPE 58x0AF Front (Port Side) to Back (Power Side) Airflow Fan Tray JC683A

HPE FlexFabric 5700 48G 4XG 2QSFP+ Switch (JG894A)

HPE A58x0AF Back (Power Side) to Front (Port Side) 300W AC Power Supply JG900A

HPE A58x0AF Back (Power Side) to Front (Port Side) 300W DC Power Supply JG901A

HPE X711 Front (Port Side) to Back (Power Side) High Volume Fan Tray JG552A

HPE X712 Back (Power Side) to Front (Port Side) High Volume Fan Tray JG553A

Call 408 758 5607 for assistance or email

HPE FlexFabric 5700 32XGT 8XG 2QSFP+ Switch JG898A

Follow